borg-init
BORG-INIT(1) borg backup tool BORG-INIT(1)
NAME
borg-init - Initialize an empty repositorySYNOPSIS
borg [common options] init [options] [REPOSITORY]DESCRIPTION
This command initializes an empty repository. A repository is a filesystem directory containing the deduplicated data from zero or more archives.Encryption mode TLDR
The encryption mode can only be configured when creating a new repository - you can neither configure it on a per-archive basis nor change the encryption mode of an existing reposi‐
tory.
Use repokey:
borg init --encryption repokey /path/to/repo
Or repokey-blake2 depending on which is faster on your client machines (see below):
borg init --encryption repokey-blake2 /path/to/repo
Borg will:
1. Ask you to come up with a passphrase.
2. Create a borg key (which contains 3 random secrets. See key_files).
3. Encrypt the key with your passphrase.
4. Store the encrypted borg key inside the repository directory (in the repo config). This is why it is essential to use a secure passphrase.
5. Encrypt and sign your backups to prevent anyone from reading or forging them unless they have the key and know the passphrase. Make sure to keep a backup of your key outside the
repository - do not lock yourself out by "leaving your keys inside your car" (see borg_key_export). For remote backups the encryption is done locally - the remote machine never
sees your passphrase, your unencrypted key or your unencrypted files. Chunking and id generation are also based on your key to improve your privacy.
6. Use the key when extracting files to decrypt them and to verify that the contents of the backups have not been accidentally or maliciously altered.Picking a passphrase
Make sure you use a good passphrase. Not too short, not too simple. The real encryption / decryption key is encrypted with / locked by your passphrase. If an attacker gets your key,
he can't unlock and use it without knowing the passphrase.
Be careful with special or non-ascii characters in your passphrase:
• Borg processes the passphrase as unicode (and encodes it as utf-8), so it does not have problems dealing with even the strangest characters.
• BUT: that does not necessarily apply to your OS / VM / keyboard configuration.
So better use a long passphrase made from simple ascii chars than one that includes non-ascii stuff or characters that are hard/impossible to enter on a different keyboard layout.
You can change your passphrase for existing repos at any time, it won't affect the encryption/decryption key or other secrets.More encryption modes
Only use --encryption none if you are OK with anyone who has access to your repository being able to read your backups and tamper with their contents without you noticing.
If you want "passphrase and having-the-key" security, use --encryption keyfile. The key will be stored in your home directory (in ~/.config/borg/keys).
If you do not want to encrypt the contents of your backups, but still want to detect malicious tampering use --encryption authenticated. To normally work with authenticated repos,
you will need the passphrase, but there is an emergency workaround, see BORG_WORKAROUNDS=authenticated_no_key docs.
If BLAKE2b is faster than SHA-256 on your hardware, use --encryption authenticated-blake2, --encryption repokey-blake2 or --encryption keyfile-blake2. Note: for remote backups the
hashing is done on your local machine.
────────────────────────────────────────────────────────────────────────────────────────────────────────────────
Hash/MAC Not encrypted no auth Not encrypted, but authenticated Encrypted (AEAD w/ AES) and authenti‐
cated
────────────────────────────────────────────────────────────────────────────────────────────────────────────────
SHA-256 none authenticated repokey keyfile
────────────────────────────────────────────────────────────────────────────────────────────────────────────────
BLAKE2b n/a authenticated-blake2 repokey-blake2 keyfile-blake2
┌──────────┬───────────────────────┬──────────────────────────────────┬────────────────────────────────────────┐
│ │ │ │ │
Modes marked like this in the above│table are new in Borg 1.1 and are not backwards-compatible with Borg 1.0.x. │
│ │ │ │ │
On modern Intel/AMD CPUs (except very cheap ones), AES is usually hardware-accelerated. BLAKE2b is faster than SHA256 on Intel/AMD 64-bit CPUs (except AMD Ryzen and future CPUs with
SHA extensions), which makes authenticated-blake2 faster than none and│authenticated. │ │
│ │ │ │ │
On modern ARM CPUs, NEON provides hardware acceleration for SHA256 making it faster than BLAKE2b-256 there. NEON accelerates AES as well. │
│ │ │ │ │
Hardware acceleration is always used automatically when available. │ │ │
│ │ │ │ │
repokey and keyfile use AES-CTR-256│for encryption and HMAC-SHA256 for│authentication in an encrypt-then-MAC (EtM) construction. The chunk ID hash│is HMAC-SHA256 as well (with a sepa‐
rate key). These modes are compatible with Borg 1.0.x. │ │ │
│ │ │ │ │
repokey-blake2 and keyfile-blake2│ are also│ authenticated encryption modes, but use BLAKE2b-256 instead of HMAC-SHA256 for authentication. The│chunk ID hash is a keyed BLAKE2b-256
hash. These modes are new and not compatible with Borg 1.0.x. │ │ │
│ │ │ │ │
authenticated mode uses no encryption, but authenticates repository contents through the same HMAC-SHA256│hash as the repokey and keyfile modes (it uses it as the chunk ID hash). The
key is stored like repokey. This mode is new and not compatible with Borg 1.0.x. │ │
│ │ │ │ │
authenticated-blake2 is like authenticated, but uses the keyed BLAKE2b-256 hash from the other blake2 modes. This mode is new and not compatible with Borg 1.0.x.
│ │ │ │ │
none mode uses no encryption and no authentication. It uses SHA256 as chunk ID hash. This mode is not recommended, you should rather consider using an authenticated or authenti‐
cated/encrypted mode. This mode has│possible denial-of-service issues when running borg create on contents controlled by an attacker. Use it only│for new repositories where no en‐
cryption is wanted and when compatibility with 1.0.x is important. If│compatibility with 1.0.x is not important, use authenticated-blake2 or authenticated instead. This mode is com‐
patible with Borg 1.0.x. │ │ │ │ │
│ │ │ │ │OPTIONS │ │ │ │ │
See borg-common(1) for common options of Borg commands. │ │ │
│ │ │ │ │arguments │ │ │ │ │
REPOSITORY │ │ │ │ │
repository to create │ │ │ │ │
│ │ │ │ │optional arguments │ │ │ │ │
-e MODE, --encryption MODE │ │ │ │ │
select encryption key mode (required) │ │ │ │
│ │ │ │ │
--append-only │ │ │ │ │
create an append-only mode repository. Note that this only affects the low level structure of the repository, and running delete or prune│ will still be allowed. See ap‐
pend_only_mode in Additional│Notes for more details. │ │ │
│ │ │ │ │
--storage-quota QUOTA │ │ │ │ │
Set storage quota of the new│repository│(e.g. 5G, 1.5T). Default: no quota. │ │
│ │ │ │ │
--make-parent-dirs │ │ │ │ │
create the parent directories of the repository directory, if they are missing. │ │
│ │ │ │ │EXAMPLES │ │ │ │ │
# Local repository, repokey encryption, BLAKE2b (often faster, since Borg 1.1) │ │
$ borg init --encryption=repokey-blake2 /path/to/repo │ │ │
│ │ │ │ │
# Local repository (no encryption) │ │ │ │
$ borg init --encryption=none /path/to/repo│ │ │ │
│ │ │ │ │
# Remote repository (accesses a remote borg│via ssh) │ │ │
# repokey: stores the (encrypted) key into <REPO_DIR>/config │ │ │
$ borg init --encryption=repokey-blake2 user@hostname:backup │ │ │
│ │ │ │ │
# Remote repository (accesses a remote borg│via ssh) │ │ │
# keyfile: stores the (encrypted) key into ~/.config/borg/keys/ │ │ │
$ borg init --encryption=keyfile│user@hostname:backup │ │ │SEE ALSO
borg-common(1), borg-create(1), borg-delete(1), borg-check(1), borg-list(1), borg-key-import(1), borg-key-export(1), borg-key-change-passphrase(1)AUTHOR
The Borg Collective
2024-07-02 BORG-INIT(1)