statserial

STATSERIAL(1) User Commands STATSERIAL(1)

NAME

   statserial - display serial port modem status lines

SYNOPSIS

   statserial [-n |  -d | -x] <device-name>

DESCRIPTION

   Statserial displays a table of the signals on a standard 9-pin or 25-pin serial port, and indicates the status of the handshaking lines. It can be useful for
   debugging problems with serial ports or modems.

   The optional device-name parameter is the full name of the device file for the serial port in question. If not specified, the default is taken from the envi
   ronment variable MODEM if set, otherwise /dev/ttyS0.

COMMAND-LINE OPTIONS

   Each of the command line options is mutually exclusive.

   -n   Normally statserial will loop continuously, updating the status at one second intervals; you can exit using Control-C. The -n option disables looping.

   -d

        With this option the status of the modem is printed as a decimal number. The bits are encoded as follows (XXX indicates unused bits):

        +---+---+---+---+---+---+---+---+---+
        | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
        +---+---+---+---+---+---+---+---+---+
        |DSR|RI |DCD|CTS|XXX|XXX|RTS|DTR|XXX|
        +---+---+---+---+---+---+---+---+---+

   -x   This option is the same as -d, except that the output is in hexadecimal.

BUGS/LIMITATIONS

   Statserial only works with devices that support the TIOCMGET ioctl.

   You need permission to read the device file.

   The device file may be locked if other applications are using it.

AUTHOR

   Statserial  was  written  by Jeff Tranter (Jeff_Tranter@Mitel.COM), later updated by Frank Baumgart (godot@uni-paderborn.de) and is released under the condi
   tions of the GNU General Public License.  See the file COPYING and notes in the source code for details.

SEE ALSO

   setserial(8) stty(1)
   /usr/src/linux/drivers/char/serial.c /usr/include/linux/termios.h

Linux 17 December 1994 STATSERIAL(1)